1. Make sure the receiver is turned off. Press and hold the power button for more than 3 seconds until the green LED rapidly flashes and a melody plays. Release the button.

2. Make sure the connector is turned on. Press and hold the Connect GPS Receiver Button until the green LED rapidly flashes.

3. The pairing is complete when the melody stops and the LED lights stop rapidly flashing.

Additional Receiver Code Pairing

Please prepare a receiver to add, and follow the same steps. You can add up to 21 PATHFINDER2 GPS Receivers.

1. Make sure the receiver is turned off. Press and hold the power button for more than 3 seconds until the green LED rapidly flashes and a melody plays. Release the button.

2. Make sure the connector is turned on. Press and hold the Connect GPS Receiver Button until the green LED rapidly flashes.

3. The pairing is complete when the melody stops and the LED lights stop rapidly flashing.