1. Locate Light

Press the Locate Light button to turn the light on or off.

2. Nick/Constant Stimulation Type

Select the stimulation type that will emit when middle button (#6) is pressed. Nick will emit a single rapid pulse of stimulation. Constant will provide continuous stimulation as long as the button is pressed, up to 12 seconds.

3. Stimulation Level

Set the stimulation from level 1-100 using the slider or arrows buttons at both ends of the slider. Press and hold anywhere on the slider to turn the “Stimulation Level Lock” feature on or off.

4. Tone

Press Tone to emit a sound as long as the button is pressed, up to 12 seconds.

5. E-Collar Stimulation Button

To select between Nick or Constant tap the corresponding button to apply the selected stimulation type from #3 will emit.

6. Pager

Press Pager to emit the Pager Vibration as long as the button is pressed, up to 12 seconds.

• You can swipe up the window to maximize the E-Collar window, and select the GPS Receiver device to transmit the stimulation.

7. Receiver detail list

Displays the list of the selected receiver and other paired receivers, along with the product type and distance.

8. Disable E-Collars

GPS Receivers and Connector to prevent accidental stimulation until re-activated. Press the same button again to activate the e-collar function. Slide the top edge of the E-Collar tab window upward to find the Disable E-Collar button under the stimulation buttons.