Fully charge the PATHFINDER GPS Connector and GPS Collar before the first use. The PATHFINDER SERIES uses lithium polymer batteries.

• Only use official Dogtra chargers with the PATHFINDER.

• Do not charge the PATHFINDER near flammable substances.

• Fully charge the PATHFINDER if storing for 1 month or longer.

When to Charge

• When the LED is red on the GPS Connector or GPS Collar.

• When the PATHFINDER app displays a low battery percentage for the GPS Connector or GPS Collar.

• When the LED on the transmitter or receiver will not come on.

• When the indicator light turns on momentarily, but will not stay on when the Constant button is pushed.

How to Charge

1. Connect the charger to the GPS Connector and GPS Collar using the splitter cable.

2. Plug the charger into a 120-volt outlet.

3. When fully charged, detach the cables and plug the rubber caps over the charging ports on the GPS Connector and GPS Collar.

4. The GPS Collar turns off and cannot be used while charging. The GPS Connector functions while being charged. The LED will display red while charging and green when the unit is fully charged. The GPS Connector LED will be green when turned on while charging. A depleted battery requires 3.5 hours to fully charge.