PATHFINDER GPS Connector connects between your smartphone and PATHFINDER GPS Collar.

These devices need to be paired for the PATHFINDER system to work properly.

Pairing a Smartphone to the GPS Connector

1. Launch the PATHFINDER app

2. Turn on the GPS Connector

3. In the PATHFINDER app, navigate to Menu → Settings → Bluetooth Pairing

4. Set the GPS Connector to pairing mode and click search in the app.

• Once paired, launching the app when the GPS Connector is on will automatically connect the phone and Connector together.

• The GPS Connector should be within Bluetooth range (33 feet) of your phone to operate.

• The GPS Connector will reconnect with the phone when it is within range.

• Reinstalling the app will require pairing with the GPS Connector.

• The PATHFINDER app may need to be restarted for compatibility issues.

Pairing Additional GPS Collars:

Pair the GPS Connector and GPS Collar in close proximity to each other.

You can use the PATHFINDER app to check if the GPS Collar is properly paired.

1. Turn the GPS Connector on.

2. Check that the GPS Collar is turned off.

3. Use the Select button on the GPS Connector to set the LED to Collar.

4. Hold down the Connect button for 5 seconds until the LED blinks rapidly. Release the button.

5. Hold down the Power button on the GPS Collar until the LED blinks rapidly and emits three beeps to show it has coded.

6. The GPS Connector and Collar will return to blinking in normal intervals when pairing is complete.