Replacing the antenna

For the GPS Connector
Twist the antenna counter-clockwise to remove.
Place the new antenna on the bolt and turn clockwise to tighten the antenna.
PATHFINDER/PATHFINDER TRX Receiver:

Open the antenna enclosure by removing the 4 screws and the contact points.
Remove the screw holding the antenna in place to replace the antenna.
PATHFINDER MINI Receiver:

Open the antenna enclosure by removing the 3 screws and the contact points.
Remove the screw holding the antenna in place to replace the antenna.
Did it help ?
Didn't find what you were looking for? Try looking on the FAQ